DR AT41026BMN Field and Brush Mower, 10-1/2 hp, 344 cc Engine Displacement, Gasoline/Oil, 26 in W Cutting, 1-Blade

In stock

SKU:
832494
Model Number:
AT41026BMN
Brand/Manufacturer:
DR
$1,799.99
/ EA
Contact Us
Our lightest and easiest-to-handle DR Brush Mower. With a 26" cut and 2" brush busting ability, the PREMIER 26 is similar to our PRO 26, except that it does not accept optional attachments.
Cutting Height
: 3-1/2 in
Rear Wheel Size
: 16 x 4-3/4 in
Dimensions
: 80 in L x 46 in H
HP Rating
: 10-1/2 hp
Engine Specifications
: Briggs
Number of Speeds
: 4
Discharge Location
: Side
Transmission Type
: Geared
Fuel Type
: Gasoline/Oil
Engine Type
: OHV
Front Wheel Size
: 16 x 4-3/4 in
Cutting Width
: 26 in
Product Category
: Lawn Mowers Gas Walk Behind
Fuel Tank Capacity
: 3.7 qt
Handle Type
: Adjustable
Number of Blades
: 1
Cutting Lawn Yard Size
: 4 ft, 8 ft, 2 in
Engine Displacement
: 344 cc
Deck Material
: Metal
Start Type
: Manual
  • Our decks are enclosed on 3 sides, so that cut material is chopped and re-chopped, reducing grass and brush to a fine mulch, this means less material is left behind in your field and none of the windrows you get with side discharging mowers
  • Assembled in the USA using foreign and domestic parts. Ships direct from our Wisconsin factory
  • The legendary power, performance and durability of Briggs & Stratton® engines make them the obvious choice for our Walk-Behind Field and Brush Mowers. The PRO 26 10.5 HP model uses a durable 344 cc Overhead Valve PowerBuilt Series manual-starting Briggs engine with cast iron cylinder sleeve
  • Unlike hydrostatic drives, the DR's geared transmission lets you lock in your ground speed, leaving your hands-free to steer the machine across uneven terrain (instead of fussing with touchy throttle controls as you go). With 3 forward gears, you can choose a fixed pace that's right for you
  • These are big (16 x 4.75 in), lugged tires that pull the PREMIER through or over just about anything and they are sealant filled...which means they're highly-resistant to puncture. Tough as nails, apparently
  • Made of 1.375 in thick cast iron with oversized double sealed bearings, the blade spindle is integrated into the deck housing and reinforced for vibration-free performance. Designed to provide years of maintenance-free use
  • A comfortable working height is important, especially when traversing rough terrain
  • Both on the control panel and on the grips, all DR Field and Brush Mowers controls are designed to optimize operator comfort and minimize hand fatigue, everything you need is right at your fingertips, so there is no walking around the mower to make adjustments
  • Our frames and decks are finished with a tough, durable powder coating that resists scratching and promotes long life
StoreAvailabilityPhoneDistance